Screw Compressor APS 7.5 Combi Dry X 10 bar 7.5 hp/5.5 kW 690 l/min 200 l

The Airpress APS 7.5 Combi Dry X screw compressor is mounted on a boiler with cooling dryer. This compressor is suitable for, among other things, workplaces, air tools, small industry, garage companies and blasting cabins. With the use of the right filtration, this compressor can also be used at damage repair companies and paint shops.

The APS 7.5 Combi Dry X can be purchased in our webshop, but if you would like advice or a suitable offer for a complete industrial installation, you can also contact our expert, Robin Snoek, +31 6 225 20 580 and / or rsnoek@airpress.nl.

  • Airpress delivers from our own stock!
  • Need advice? Contact us!
  • Thanks to our knowledge, you have the best product.
  • 50 years of experience in the field of air pressure.

Downloads

Download PDF
  • ce
  • gs-sud

Details

SKU 369007
EAN 8712418361766
Weight (kg) 310,00
Length, Width, Height (cm) 140 x 60 x 143
Workload (labor/rest %) 100/0
Motor power 7.5 HP / 5.5 kW
Motor efficiency class IE2
Motor Type AC
Drive Direct driven 1:1
Dryer 230 V / 50 Hz / 1 Ph
Air receiver Yes
Capacity air receiver (l) 200
Free air delivery (l/min) 690
Maximum pressure (bar) 10
Maximum free air delivery (l/min) 690
Maximum free air delivery (m3/h) 41.4
Free air delivery (m3/h) 41.4
Noise level dB(A) (0 m) 63
Noise level dB(A) (4 m) 43
Plug type EU
Refrigerant Air
Main air connection (") 3/4 Female
Direct air connection (") -
Oilfree No
Stages 1
Start Y-∆
Voltage (V) 400 V / 50 Hz / 3 Ph
After cooler No
Variable speed (IVR) No

Description of screw Compressor APS 7.5 Combi Dry X 10 bar 7.5 hp/5.5 kW 690 l/min 200 l

The Airpress APS 7.5 Combidry X is a direct driven screw compressor with a fixed speed. Due to the compact design, this machine does not take up much space, but it does have a 200 liter compressed air boiler and a cooling dryer. The direct drive ensures a 1 on 1 transfer from the electric motor to the screw block, so that no losses occur. A large screw block ensures a high airflow at a low speed. The most important parameters can be read and adjusted on the display of the controller. A large oil cooler with fan, which temperature is switched, provides excellent cooling. The machine has been carefully designed so that fewer parts are maintenance-sensitive and the machine is therefore very durable. The service interval of 3,000 hours also ensures lower maintenance costs.

With Smartcontrol

X series Screw compressors

By continuously investing in the development of our products, the Airpress Group presents a new series of screw compressors. The screw compressors are available from 5.5 kW to 37 kW. The APS X series is available in two versions: controlled at a fixed speed or speed. Machines of 15 kW are also available with a two-stage screw block. These versions have an increased performance with the same power consumption as a single-stage version. Depending on demand, these machines are available as a separate unit, mounted on a tank or mounted on a tank and equipped with a compressed air dryer. Compressors of the X series are characterized by a new generation of screw blocks. The direct drive avoids losses due to the transmission. Reliable and efficient, easy-to-use screw compressors ensure trouble-free operation at minimal costs. Equipped with a modern control panel, you can constantly monitor the screw compressor and change parameters if necessary.

Reviews

Write Your Own Review
You're reviewing:Screw Compressor APS 7.5 Combi Dry X 10 bar 7.5 hp/5.5 kW 690 l/min 200 l
Your Rating