• heroicons/outline/check The widest offer on the market
  • heroicons/outline/check Hundreds of distributors all over Europe
  • heroicons/outline/check A proven business partner
  • heroicons/outline/check Own warehouses in Poland and Netherlands
  • heroicons/outline/check Full service support
  • heroicons/outline/check 100% safe online shopping

Screw Compressor APS 7 Basic i-Combi Dry 10 bar 7.5 HP/5.5 kW 780 l/min 200 l with OFAG4 Adsorption Filter Set

SKU 362957I

The APS 7 Basic i-Combi Dry 200 l is an advanced 7.5 HP (5.5 kW) screw compressor integrated with a tank and the adsorption dryer and filter set OFAG4. Thanks to the set OFAG4, it delivers air quality compliant with class 1.3.1/0 according to ISO 8573-1, effectively eliminating moisture, oils, and solid particles. With a free air delivery of 780 l/min and a maximum pressure of 10 bar, it is ideal for industrial and workshop applications. The IE3 motor, belt drive system, and low noise level of 66 dB (A) ensure energy saving, reliability, and a comfortable working environment.

  • heroicons/solid/check-circle Airpress delivers from our own stock!
  • heroicons/solid/check-circle Need advice? Contact us!
  • heroicons/solid/check-circle Thanks to our knowledge, you have the best product.
  • heroicons/solid/check-circle More than 60 years of experience in compressed air technologies.

Product details

SKU 362957I
EAN 8712418421156
Length (mm) 1430
Width (mm) 600
Height (mm) 1260
Weight (kg) 210,00
Units per product (pcs.) 1
Workload (labor/rest %) 100/0
Motor power (hp / kW) 7.5 HP / 5.5 kW
Motor efficiency class IE3
Motor Type AC
Drive V-belt driven
Control panel ON/OFF
Dryer Yes
Dryer voltage (V) 230
Air receiver Yes
Capacity air receiver (l) 200
Galvanized tank No
Maximum pressure (bar) 10
Cut-in pressure (bar) 8
Free air delivery (l/min) 780
Free air delivery (m3/h) 46.8
Noise level dB(A) (0 m) 66
Noise level dB(A) (4 m) 46
Plug type EU
Main air connection (") 3/8", 1/2"
Oilfree No
Oil capacity (l) 3.20
Air-end C43
Stages 1
Start Y-∆
Voltage (V) 400 V / 50 Hz / 3 Ph
Variable speed (IVR) No
Autoregulation of idling Yes
Nominal value flow inlet (l/min) 600
Nominal value flow inlet (Nm3/h) 36
Consumption for regeneration (l/min) 81,83
Prefilter (type) Cyclone filter, P filter - 3 µm, S filter - 0.01 µm
Postfilter (type) R filter - 1 µm
Residual oil content (mg/m3) <0.005
Pressure dew points (°C) -20 / -25
Characteristics no oil heating

Description

APS 7 Basic i-Combi Dry 200-litre Screw Compressor with OFAG4 Adsorption Filter Set

The APS 7 Basic i-Combi Dry 200 l is an advanced 7.5 HP (5.5 kW) screw compressor integrated with a 200-litre tank and an OFAG4 adsorption filter set. Like all Airpress APS Basic i-Combi Dry compressors, it combines modern technologies with energy efficiency and reliability. The integrated OFAG4 adsorption dryer effectively removes moisture, safeguarding machinery against contamination and corrosion. The multi-stage filtration system ensures superior air quality, effectively eliminating oils and solid particles. The compressor therefore delivers air that meets ISO 8573-1 Class 1.3.1/0 standards. With a capacity of 780 l/min and a maximum pressure of 10 bar, this model is ideal for industrial and demanding workshop applications.

Advanced Design

  • OFAG4 adsorption dryer: The dew point of -20°C (optionally -25°C) eliminates the risk of condensation.
  • Advanced filtration system: Three prefilters (cyclone filter, P filter (3 µm), R filter (1 µm)) and one microfilter (S filter (0.01 µm)) effectively remove impurities.
  • IE3 motor: The energy-efficient 7.5 HP (5.5 kW) motor minimizes energy consumption and operational costs.
  • 200 l tank: Stabilizes pressure and reserves air for intensive applications.
  • Belt drive: Increases the durability of the device and reduces maintenance requirements.
  • Low noise level (66 dB(A)): The device is suitable for use close to workstations.

Air Efficiency and Quality

The APS 7 Basic i-Combi Dry 200 l delivers air at a flow rate of 780 l/min, meeting the requirements of precise industrial processes. The adsorption dryer and air filtration system eliminate the need for additional treatment devices, which reduces costs and simplifies installation.

The advanced OFAG4 adsorption dryer is equipped with a pressure dew point sensor, allowing operation in an intelligent (variable) mode. Thanks to this, the maximum amount of air used for regeneration is only 5%, which allows for optimizing the energy efficiency of the system. This ensures the highest quality air class 1.3.1/0 (ISO 8573-1) and minimises the impact of regeneration on the practical performance of the compressed air.

Versatility and Efficiency

The APS 7 Basic i-Combi Dry 200-litre model is the ideal solution for companies needing a reliable, quiet, and energy-efficient source of compressed air. Its compact design and large tank capacity ensure optimal performance in the most demanding environments.

Investment in Reliability

Choosing the APS 7 Basic i-Combi Dry means investing in a modern device that provides high performance, low operating costs, and minimal maintenance requirements. The integrated air compression and treatment system guarantees maximum reliability and operational efficiency.

Airpress screw compressor warranty

To ensure long-term protection and certainty of use, we cover the product with a standard 3-year warranty, with the possibility of extension to 4 or 5 years.

APS 7 Basic i-Combi Dry 200-l screw compressor with OFAG4 adsorption filter set | Airpress

Do you need help? Please fill out the form below and we will get back to you as soon as possible!

loader
Loading...
To best assist you, please provide a clear description of the company's activities, the type of business, and the requirements for compressed air systems. For example: "For my auto repair workshop, I need a compressed air installation with an external compressed air tank and an easy-to-use screw compressor. We paint cars, among other tasks, and there must be the ability to power various pneumatic tools simultaneously, such as impact wrenches and blow guns."

Documents & Manuals

Customer Reviews

Write Your Own Review
You're reviewing: Screw Compressor APS 7 Basic i-Combi Dry 10 bar 7.5 HP/5.5 kW 780 l/min 200 l with OFAG4 Adsorption Filter Set
loader
Loading...

check-circle You submitted your review for moderation.