Screw Compressor APS 7.5 Combi Dry X IVR 10 bar 7.5 hp 690 l/min 200 l

  • Airpress delivers from our own stock!
  • Need advice? Contact us!
  • Thanks to our knowledge, you have the best product.
  • 50 years of experience in the field of air pressure.

Downloads

Download PDF

Details

SKU 369957-IVR
EAN 8712418372335
Weight (kg) 280,00
Length, Width, Height (cm) 145 x 67 x 147.4
Subsidy possibility BAFA (DE)
Workload (labor/rest %) 100/0
Motor capacity 7.5 HP / 5.5 kW
Drive Direct driven 1:1
Dryer Yes
Air receiver Yes
Capacity air receiver (l) 200
Maximum pressure (bar) 10
Free air delivery (l/min) 690
Free air delivery (m3/h) 41.4
Noise level dB(A) (0 m) 63
Refrigerant Air
Cooling air volume (m3/h) 2300
Air Connection 3/4"
Minimum ambient temperature (°C) 0
Maximum ambient temperature (°C) 45
Motor Type PM Synchroon Motor
Oilfree No
Oil capacity (l) 6
Stages 1
Start Inverter
Voltage 400 V / 50 Hz / 3 Ph
After cooler No
Variable speed (IVR) Yes
Minimum rpm 10 bar (rpm/Hz) 1100
Maximum rpm 10 bar (rpm/Hz) 1960
Minimum free air delivery (l/min) 290
Minimum free air delivery (m3/min) 0.29
Maximum free air delivery (l/min) 690
Maximum free air delivery (m3/min) 0.69
Minimum energy consumption 10 bar (kW/m3/h) 9,4
Maximum energy consumption 10 bar (kW/m3/h) 10,8

Often bought together

Description of screw Compressor APS 7.5 Combi Dry X IVR 10 bar 7.5 hp 690 l/min 200 l

The APS 7.5 IVR Combidry X is a 5.5 kW direct driven screw compressor with variable speed and a yield up to 690 liters per minute. This makes this machine unique and very versatile, especially for small air users who often still use a piston compressor. A permanent magnet synchronous motor makes the machine even more economical, especially in the low revs, so that the efficiency is significantly higher than with an asynchronous motor. Due to the compact design, this machine takes up little space, but it does have a 200-liter compressed air boiler and a cooling dryer. The direct drive ensures a 1 on 1 transfer from the electric motor to the screw block, so that no losses occur. All parameters can be read and adjusted in the menu of the very comprehensive but well-arranged controller which is equipped with a full color touchscreen. This allows the machine to be adjusted per situation for maximum efficiency. The service interval of 3,000 hours also ensures lower maintenance costs. This machine is very suitable for small companies that have variable air take-off but where a silent compressor with dry compressed air is required.

X series Screw compressors

By continuously investing in the development of our products, the Airpress Group presents a new series of screw compressors. The screw compressors are available from 5.5 kW to 37 kW. The APS X series is available in two versions: controlled at a fixed speed or speed. Machines of 15 kW are also available with a two-stage screw block. These versions have an increased performance with the same power consumption as a single-stage version. Depending on demand, these machines are available as a separate unit, mounted on a tank or mounted on a tank and equipped with a compressed air dryer. Compressors of the X series are characterized by a new generation of screw blocks. The direct drive avoids losses due to the transmission. Reliable and efficient, easy-to-use screw compressors ensure trouble-free operation at minimal costs. Equipped with a modern control panel, you can constantly monitor the screw compressor and change parameters if necessary.

Reviews

Write Your Own Review
You're reviewing:Screw Compressor APS 7.5 Combi Dry X IVR 10 bar 7.5 hp 690 l/min 200 l
Your Rating